Unique Products for Your Boat

Victron 30A Blue Smart IP22 12V Single Bank 120V Charger - Dry Mount

$239.00 $189.15

ALL ORDERS USA SHIPPING ONLY

 Click Here For International Shipment Info

**10.99 FLAT RATE SHIPPING = CONTIGUOUS USA ONLY**

Victron 30A Blue Smart IP22 12V 1 Bank 120V Charger - Dry Mount

This is our new favorite single bank 30A battery charger! Why? This charger can be programmed eight ways from Sunday and represents the absolute best value in a marine charger at any price. Can charge GEL, Flooded Lead Acid, AGM, TPPL AGM & LiFePO4! Use this single bank charger in conjunction with an ACR/Combiner/VSR or a DC to DC charger, such as the Sterling BB1230 or BB1260 or the Victron Orion TR Smart to charge a second bank. Built in Bluetooth for programming and a built in power cord for easy installation.


Blue Smart IP22 12VDC 30A 1 Bank 120V Charger - Dry Mount

The Blue Smart IP22 Charger is a battery charger with built-in Bluetooth for custom programming. The Blue Smart IP22 is a marine charger that can also be used on devices in your workshop, on cars & trucks & antique cars, motorcycles & RV's and vans. 

Bluetooth Smart

The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage

The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘condition’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges LiFePO4 batteries

LiFePO4 batteries are charged with a simple bulk – absorption algorithm. The IP22 allows you to custom program how much time is spent in absorption. The float feature can be custom programmed to allow the batteries to sit at close to 50% SoC when not being used. This will aid in the longevity of the batteries by not continually holding them at 100% SoC.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts where most "smart chargers" will not do this. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating

Output current will automatically reduce as the internal temperature increases up to 50°C, but the Blue Smart Charger will not fail. Here in our shop we charged a 600Ah LiFePO4 bank from 0% SoC to 100% SoC, for nearly 20 straight hours, in full bulk, and it never even got hot enough to drop its output below 30A. That means this charger is extremely efficient and fully capable of even charging large LiFePO4 banks.

Eleven LEDs for status indication

Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.